EyCatcher Metal Wind Spinners Wind Art are an innovative new product that's sweeping the nation! EyCatcher Metal Wind Spinners Wind Art beauty will add a touch of elegance to any GARDEN DECOR. A whole new generation of Sun Catchers has arrived! Quality Products for Quality minded people. Unlike any cheap imitations. EyCatcher Metal Wind Spinner Wind Art are made with 18 gauge steel that's cut with a laser, color is baked into the product, and finished with a highly reflective durable powder coated paint. The finest quality workmanship is put into every EyCatcher. EyCatcher Metal Wind Spinner Wind Art are a unique product that is manufactured in the USA (don't get fooled by the cheap quality knock offs) are making big waves all over the country and the design team is always on the cutting edge with new ideas. “EyCatchers®, SunSation®s and MinEys(as the case may be) are registered or pending trademarks of Next Innovations, Ltd. Designs used in EyCatchers® and SunSations® wind spinner products are registered or pending copyrights owned by Next Innovations, Ltd. Any trademarks or copyrights used herein are used with the permission of the owner. In order to get the maximum enjoyment from your windspinner, it must spin. If air cannot easily go between the vanes of the wind spinner, it will swing instead of spin. This means your wind spinner is flat. To maximize the spinning effect of your metal wind spinner, the vanes will need to be spread apart. Begin spreading the vanes by pushing the center from the first vanes, leaving 1/4 to 1/2 inch spacing. Continue spacing the other vanes an equal distance from each other. Your wind spinner may need adjusted more than once to get it to spin properly. Remember, a swinging wind spinner means not enough air is getting through. Spread the vanes farther apart. A non-moving wind spinner means the vanes are too far apart, too much air is getting through. Move them closer together. Bend the vanes to the optimal 65 degree angle. |
|